Automatic terminal machine does not cut material is how to return a responsibility?
Release time:
2023-09-15 10:16
Source:
Now most of the automatic terminal machine is with a fixed length cut off function, if found not cut, what is the reason.
1. Whether it is a setting problem
If it is a fully automatic terminal machine with cut-off function, but does not cut off the material, it cannot continue to work normally, which is a more serious problem, but don't worry, first check whether it is an installation problem, and follow the inspection principle of first soft and then hard. It may be necessary to refer to the instructions.
2. Faults around
Non-cutting problems caused by the failure of the non-fully automatic terminal machine itself, such as insufficient air supply of the compressor, weak cutting, and the cutting line may not be able to move. Then, it is necessary to check the gas supply capacity of the compressor. Fully automatic use of the compressor requires specific calculations. Not only that, but also need to be familiar with the requirements of the compressor for the fully automatic cable terminal machine.
3. Failure of the machine itself
After checking the hardware failure of the automatic terminal machine itself, usually according to the experience of technicians, check the repair history to solve the problem, maybe you can find a solution. In fact, this is also easy to understand, just like a person, there may be some old problems. Doctors may look at medical records and get information from them.
Prev
Next
Related News
Choosing the right tool and material for the cutting machine
Cutting machine is a kind of professional drawing equipment, its working principle is to draw drawings in the computer system, and then the drawings through the scanning head and cutting tool on the cutting machine to cut out patterns of various shapes.
What are the main points of maintenance of the sewing machine?
Special sewing machine oil must be used. The sewing machine should be oiled once after continuous use * * * or several days. If the sewing machine is oiled between uses, the machine should be idling for a period of time to fully soak the oil and throw out the excess oil, and then the machine head and table top should be wiped clean with a clean soft cloth to avoid soiling the sewing material. Then thread the thread to sew the rag, wipe it with the movement of the sewing thread, throw out excess oil stains until there are no oil stains on the rag, and then formally sew it.
Performance characteristics and operation points of the sewing machine
The unique butt decorative pattern stitch can be used for seams and ordinary decorative seams, and can also be made into braided rope stitch with single thread as decorative design, which can increase the beauty and different effects of clothing products.
What are the basic requirements for using a cutting machine?
Cutting machine is a kind of professional drawing equipment, its working principle is to draw drawings in the computer system, and then the drawings through the scanning head and cutting tool on the cutting machine to cut out patterns of various shapes. During the installation and commissioning process, the following aspects need to be paid attention:
Wireless sewing machine operation method
According to the wood material, flatness debugging machine pressure. Generally, the air pressure of the heating plate is adjusted to between 1-2bar, the air pressure of the conveyor belt is adjusted to between 0.1-0.2bar, and the air pressure of the feeding wheel is adjusted to between 1.0-2.0bar. The wood skin is hard, the thickness of the wood skin is thick, and the air pressure is relatively large.
The characteristics of cutting machine
1, fast: a drawing file can be completed in a few minutes, the machine can work 24 hours, can do small batch production. No knife die required.
Contact Information
Telephone:0769-85652993
Contact: Miss Wu13580812077
Fax: 0769-85652693
Mailbox:1447571664@qq.com
Address: No.7, Industrial Road, Xiagaotian Village, Dalingshan Town, Dongguan City
Sweep：
