The characteristics of cutting machine
Release time:
2021-11-09 10:29
Source:
Features
1, fast: a drawing file can be completed in a few minutes, the machine can work 24 hours, can do small batch production. No knife die required.
2, high accuracy: the use of high-precision imported guide rail, the accuracy of up to 0.05mm.
3. No cutting die opening: it can prevent customers from constantly modifying drawing files and causing excessive input cost for proofing in the early stage.
4. Good effect: the cut-out effect is the same as that of the knife mold forming product, avoiding the edge scorching caused by laser proofing.
5. The performance is higher than that of the laser machine: the laser will burn and the cutting accuracy is high.
6. Wide cutting range: deep thickness, many varieties, exclusive in China.
Environmental protection: pollution-free, suitable for dust-free workshop, fully automatic computer program control cutting.
8. Convenient operation: free on-site installation and debugging training, and employees can operate and produce by themselves within 30 minutes.
Prev
Next
Related News
Choosing the right tool and material for the cutting machine
Cutting machine is a kind of professional drawing equipment, its working principle is to draw drawings in the computer system, and then the drawings through the scanning head and cutting tool on the cutting machine to cut out patterns of various shapes.
What are the main points of maintenance of the sewing machine?
Special sewing machine oil must be used. The sewing machine should be oiled once after continuous use * * * or several days. If the sewing machine is oiled between uses, the machine should be idling for a period of time to fully soak the oil and throw out the excess oil, and then the machine head and table top should be wiped clean with a clean soft cloth to avoid soiling the sewing material. Then thread the thread to sew the rag, wipe it with the movement of the sewing thread, throw out excess oil stains until there are no oil stains on the rag, and then formally sew it.
Performance characteristics and operation points of the sewing machine
The unique butt decorative pattern stitch can be used for seams and ordinary decorative seams, and can also be made into braided rope stitch with single thread as decorative design, which can increase the beauty and different effects of clothing products.
What are the basic requirements for using a cutting machine?
Cutting machine is a kind of professional drawing equipment, its working principle is to draw drawings in the computer system, and then the drawings through the scanning head and cutting tool on the cutting machine to cut out patterns of various shapes. During the installation and commissioning process, the following aspects need to be paid attention:
Wireless sewing machine operation method
According to the wood material, flatness debugging machine pressure. Generally, the air pressure of the heating plate is adjusted to between 1-2bar, the air pressure of the conveyor belt is adjusted to between 0.1-0.2bar, and the air pressure of the feeding wheel is adjusted to between 1.0-2.0bar. The wood skin is hard, the thickness of the wood skin is thick, and the air pressure is relatively large.
The characteristics of cutting machine
1, fast: a drawing file can be completed in a few minutes, the machine can work 24 hours, can do small batch production. No knife die required.
Contact Information
Telephone:0769-85652993
Contact: Miss Wu13580812077
Fax: 0769-85652693
Mailbox:1447571664@qq.com
Address: No.7, Industrial Road, Xiagaotian Village, Dalingshan Town, Dongguan City
Sweep：
