Wireless sewing machine operation method
Release time:
2021-11-09 10:27
Source:
1. Turn on the power and check whether the machine is running normally.
2. Before the wood skin stitching, check whether the temperature and air pressure of the machine are stable:
A. The temperature is set to about 185°C.
B, according to the wood material, flatness debugging machine pressure. Generally, the air pressure of the heating plate is adjusted to between 1-2bar, the air pressure of the conveyor belt is adjusted to between 0.1-0.2bar, and the air pressure of the feeding wheel is adjusted to between 1.0-2.0bar. The wood skin is hard, the thickness of the wood skin is thick, and the air pressure is relatively large.
3. Adjust the speed of the machine according to the flatness of the wood skin. The speed of the slightly wrinkled wood skin machine is adjusted to 1 or 2 gears, and the flat wood skin speed is adjusted to 3 files.
4. When the heat conduction plate of the machine is glued with colloidal particles, it must be cleaned in time and coated with anti-sticking agent. Iron cannot be used when cleaning the colloidal particles, so as not to scratch the plane of the heat conduction plate.
5. When sewing, it is necessary to check whether the glued wood skin is evenly painted and whether the glue is dried.
6, the patchwork must check whether the width and length of the wood skin ingredients meet the process requirements.
7. The first stitching line of the stitching line must be checked first: whether the stitching line is well combined, whether the stitching line is cracked, whether the wood skin is misplaced, and whether there are indented colloidal particles on the surface.
8, according to the customer's process requirements for patchwork.
9, patchwork finished wood skin, vice hand check repair. The repaired wood skin must not overlap, and the repaired glue line must be on the same side (reverse side) of the wood skin. Repair length of wood skin cracking: 1/3 for short materials below 500mm and 1/5 for short materials above 500mm.
10, patchwork finished wood skin must write the number, the number is written in the middle of the wood skin, the length of the wood skin must write the number at both ends.
11, repaired finished wood skin must be neatly stacked, different specifications, different levels of wood skin stacked separately.
12, final inspection, initial inspection returned defective products must be reworked on the same day qualified.
13. During production, the wood skin must be handled with light.
14, turn off the machine power supply when leaving work, clean the area of health.
Prev
Next
Related News
Choosing the right tool and material for the cutting machine
Cutting machine is a kind of professional drawing equipment, its working principle is to draw drawings in the computer system, and then the drawings through the scanning head and cutting tool on the cutting machine to cut out patterns of various shapes.
What are the main points of maintenance of the sewing machine?
Special sewing machine oil must be used. The sewing machine should be oiled once after continuous use * * * or several days. If the sewing machine is oiled between uses, the machine should be idling for a period of time to fully soak the oil and throw out the excess oil, and then the machine head and table top should be wiped clean with a clean soft cloth to avoid soiling the sewing material. Then thread the thread to sew the rag, wipe it with the movement of the sewing thread, throw out excess oil stains until there are no oil stains on the rag, and then formally sew it.
Performance characteristics and operation points of the sewing machine
The unique butt decorative pattern stitch can be used for seams and ordinary decorative seams, and can also be made into braided rope stitch with single thread as decorative design, which can increase the beauty and different effects of clothing products.
What are the basic requirements for using a cutting machine?
Cutting machine is a kind of professional drawing equipment, its working principle is to draw drawings in the computer system, and then the drawings through the scanning head and cutting tool on the cutting machine to cut out patterns of various shapes. During the installation and commissioning process, the following aspects need to be paid attention:
Wireless sewing machine operation method
According to the wood material, flatness debugging machine pressure. Generally, the air pressure of the heating plate is adjusted to between 1-2bar, the air pressure of the conveyor belt is adjusted to between 0.1-0.2bar, and the air pressure of the feeding wheel is adjusted to between 1.0-2.0bar. The wood skin is hard, the thickness of the wood skin is thick, and the air pressure is relatively large.
The characteristics of cutting machine
1, fast: a drawing file can be completed in a few minutes, the machine can work 24 hours, can do small batch production. No knife die required.
Contact Information
Telephone:0769-85652993
Contact: Miss Wu13580812077
Fax: 0769-85652693
Mailbox:1447571664@qq.com
Address: No.7, Industrial Road, Xiagaotian Village, Dalingshan Town, Dongguan City
Sweep：
